The sawdust briquette machine is used for briquetting the sawdust
or other biomass waste
into briquettes,the briquettes can be furtherly carbonized into
charcoal, or be used as fuel
directly for boiler etc.
What raw materials can we used for our briquette machine?
Almost any biomass can be briquetted,then carbonized Briquetting
plants set so far are using Saw Dust, Bamboo dust, Bagasse, Cotton
Stalk, Coffee husk, Groundnut Shell, Mustard Husk/Stalk, Pine
Needles, Rice Husk, Sugar Mill Waste, Jute waste, Coir pith and
other wastes & residues like Castor Shell, Red Gram Stalk,
Tobacco stem, Tea Waste, Sander Dust, Tree Bark, Wild Grasses &
Shrubs and Sander dust. can be also be briquetted individually or
in combination without using any binder.
Features of biomass wood sawdust charcoal briquette machine :
1.Stick shape with different diameter.
2.The density, strength and hardness of products are very high.
3.Our briquette machine with higher capacity and lower energy
4.Production moisture is 8-12% ,raw material size below 3-5mm.
5.This series of briquette machine is a new type of wood briquette
machine,the finished products are more solid.
6.This Wood Briquette Machine with automatic temperature control
system is designed to produce high density wood briquette stick from biomass.
Final product of biomass wood sawdust charcoal briquette machine :
1.Final shape:hexagon, pentagon, square, round
2.Final length: 20-40 cm adjustable, according to per your needing
3.Final size: diameter=50mm
Parameters of Factory Supply Wood Dust Charcoal Briquette Making
|Voltage||220v,380v,or as your requirement|
|Size of briquette||diameter=50mm, Length=20-40cm|
Formation and working principle:
Requirment of the raw material to make briquette:
1)The raw materials want to make briquetted should be 3-5mm in
diameter,too big will influence the machine working result.If the
raw materials are not the wood sawdust or other powder,it should be
crushed at first!
2)The materials moisture should less than 12%,too wet will take
more time for the briquette machine to heat and will reduce the
machine capacity!So after the materials crushed,it should be dried
then to make briquette!
3)The briquette from the machine is with high density,it can burn
long time and with less smoke!If you want to get the charcoal,you
can make the next step--carbonized then you will get the charcoal!
How to convert the wood briquette into charcoal briquette ?
1.Crush the raw material into small pieces (diameter is about
2. Dry the material by machine or dried it in the sun , till the
moisture is less than 12%.
3. Put the material into feed let of briquette machine.
4.Produce the briquette stick from biomass material without any
5.Carbonized the briquette stick.
Before sale services:
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3)According to the clients’ special requirement, offering the
reasonable plan and free design to help to select the equipment.
4)Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging